Home > slashdot > Tapering Waveguide Captures a Rainbow

Tapering Waveguide Captures a Rainbow

November 28th, 2009 11:51 admin Leave a comment Go to comments

SubComdTaco passes along news of researchers in the US who have trapped a rainbow in a tapering waveguide. The research is described (PDF) on the arXiv. “In 2007, Ortwin Hess of the University of Surrey in Guildford, UK, and colleagues proposed a technique to trap light inside a tapering waveguide [made of metamaterials]… The idea is that as the waveguide tapers, the components of the light are made to stop in turn at ever narrower points. That’s because any given component of the light cannot pass through an opening that’s smaller than its wavelength. This leads to a ‘trapped rainbow.’ … Now Vera Smolyaninova of Towson University in Baltimore, Maryland, and colleagues have used a convex lens to create the tapered waveguide and trap a rainbow of light. They coated one side of a 4.5-mm-diameter lens with a gold film…, and laid the lens — gold-side down — on a flat glass slide which was also coated with film of gold. Viewed side-on, the space between the curved lens and the flat slide was a layer of air that narrowed to zero thickness where the lens touched the slide — essentially a tapered waveguide. When they shone a multi-wavelength laser beam at the… gilded waveguide, a trapped rainbow formed inside. This could be seen as a series of colored rings when the lens was viewed from above with a microscope: the visible light leaked through the thin gold film.”

Related Articles:

  1. First Experimental Demonstration of a Trapped Rainbow Using Silicon
  2. Look At This: A Rainbow, Magnetic Twister on the Sun
  3. Reading Rainbow Kickstarter Earns One Million Dollars In Less Than a Day
  4. New Flat Lens Focuses Without Distortion
  5. Reading Rainbow Kickstarter Heads Into Home Stretch
blog comments powered by Disqus